● General Description:
Network upgrades are also made easier because SFPs are interchangeable fiber connectors that can adapt to any existing network. For example, by simply replacing the pluggable optical transceiver, a media converter that was originally used in a multimode network can be re-configured to operate over a CWDM network. Fiber Optic Transceiver Module is a self-contained component that can both transmit and receive. Usually, it is inserted in devices such as routers or network interface cards which provide one or more transceiver module slot (e.g GBIC, SFP, XFP).OPTOSTAR provide a full range of optical transceivers, such as SFP+ (SFP Plus) transceiver, X2 transceiver, XENPAK transceiver, XFP transceiver, SFP (Mini GBIC) transceiver, GBIC transceiver, CWDM/DWDM transceiver, 40G QSFP+ & CFP, 3G-I video SFP, WDM Bi-Directional transceiver and PON transceiver. All our fiber transceivers are 100% compatible with major brands like Cisco HP Juniper Nortel Force10 D-link 3Com They are backed by a lifetime warranty, and you can buy with confidence. We also can customize optical transceivers to fit your specific requirements.
● Quick Details:
► Data Rate up to 1.25G SFP;
► Single fiber full duplex solution;
► Metal enclosure for lower EMI;
► Receiver PIN or APD;
► Meet SFP Multi-Source Agreement and SFF-8472 with LC connector;
► Soft TX_FAULT and RX_LOS monitor;
► With user writable EEPROM;
► All-metal housing for superior EMI performance;
► Advanced firmware allow customer system encryption information to be stored in transceiver;
► Cost effective SFP+ solution, enables higher port densities and greater bandwidth 550-Meter.
● Application:
► Ethernet Switch;
► Fiber Channel;
► Enterprise Router;
► CPRI and OBSAI;
► Data Center.
● Description:
Form Factor | SFP |
Compatibility |
Cisco Compatible |
Distance |
40km |
Max Data Rate |
1000Mbps |
Wavelength |
1550nm |
Max Cable Distance |
40km over OM2 MMF |
Interface |
LC Duplex |
Verification Optical Components |
WDM BiDi |
DOM Support |
Yes |
Cable Type |
SMF |
TX Power |
-9.5 ~ - 3dBm |
Receiver Sensitivity |
< -17dBm |
HS Code |
Optical fibre cables-85447000.00 |
● Optical characteristics transceiver:
Parameters | Symbols |
Min |
Typ |
Max |
Unit |
40km | |||||
Centre Wavelength BXD |
λC |
1320 |
1330 |
1340 |
nm |
Centre Wavelength BXU |
λC |
1260 |
1270 |
1280 |
nm |
Spectral Width (RMS) |
σ |
|
|
1 |
nm |
Average Output Power |
P0ut |
-3 |
|
+2 |
dBm |
Extinction Ratio |
EX |
3.5 |
6 |
|
dB |
● Optical characteristics receiver:
Parameters | Symbols |
Min |
Typ |
Max |
Unit |
20km | |||||
Centre Wavelength BXD |
λC |
1260 |
1270 |
1280 |
nm |
Centre Wavelength BXU |
λC |
1320 |
1330 |
1340 |
nm |
Reveiver Sensitivity |
Sen |
-14.5 |
|
|
dBm |
Maximum input |
Pmax |
0 |
|
|
dBm |
LOS De-Assert |
LOSd |
|
|
-14 |
dBm |
LOS Assert |
LOSa |
-25 |
|
|
dBm |
LOS Hysteresis |
LOSh |
0.5 |
|
4 |
dBm |
40km | |||||
Centre Wavelength BXD |
λC |
1260 |
1270 |
1280 |
nm |
Centre Wavelength BXU |
λC |
1320 |
1330 |
1340 |
nm |
Reveiver Sensitivity |
Sen |
-16 |
|
|
dBm |
Maximum input |
Pmax |
0 |
|
|
dBm |
LOS De-Assert |
LOSd |
|
|
-17 |
dBm |
LOS Assert |
LOSa |
-27 |
|
|
dBm |
LOS Hysteresis |
LOSh |
0.5 |
|
4 |
dBm |
60km | |||||
Centre Wavelength BXD |
λC |
1260 |
1270 |
1280 |
nm |
Centre Wavelength BXU |
λC |
1320 |
1330 |
1340 |
nm |
Reveiver Sensitivity |
Sen |
-22 |
|
|
dBm |
Maximum input |
Pmax |
-7 |
|
|
dBm |
LOS De-Assert |
LOSd |
|
|
-23 |
dBm |
LOS Assert |
LOSa |
-33 |
|
|
dBm |
LOS Hysteresis |
LOSh |
0.5 |
|
4 |
dBm |
80km | |||||
Centre Wavelength BXD |
λC |
1480 |
1490 |
1500 |
nm |
Centre Wavelength BXU |
λC |
1530 |
1570 |
1580 |
nm |
Reveiver Sensitivity |
Sen |
-22 |
|
-7 |
dBm |
Maximum input |
Pmax |
-7 |
|
|
dBm |
LOS De-Assert |
LOSd |
|
|
-24 |
dBm |
LOS Assert |
LOSa |
-34 |
|
|
dBm |
LOS Hysteresis |
LOSh |
0.5 |
|
|
dBm |
Dispersion penalty |
|
|
|
3.0 |
dBm |
● Electrical characteristics:
Parameters | Symbols |
Min |
Typ |
Max |
Unit |
Remarks |
Supply Voltage |
Vcc |
3.14 |
3.3 |
3.46 |
V |
|
Supply Current 20km |
Icc |
|
270 |
350 |
mA |
|
Supply Current 40km |
|
|
300 |
450 |
mA |
|
Supply Current 60km |
|
|
300 |
450 |
mA |
|
Supply Current 80km |
|
|
|
500 |
mA |
|
| ||||||
Supply Voltage |
Vcc |
3.14 |
3.3 |
3.46 |
V |
|
Supply Current |
Icc |
|
|
300 |
mA |
|
Reference Differential Input |
Zd |
|
100 |
|
mA |
|
Input AC Common Mode Input |
|
0 |
25 |
|
mA |
|
Differential Input Voltage Swing |
VID |
150 |
|
900 |
mA |
|
Total Jitter |
|
|
|
|
|
|
Data Dependant Jitter |
|
|
|
|
|
|
Uncorrelated Jitter |
|
|
|
|
|
|
Eye Mask |
See SFP+ MSA |
X1 |
|
|
|
UI |
Eye Mask |
See SFP+ MSA |
X2 |
|
|
0.35 |
UI |
● ESD:
Packaging & Labeling
This easy to handle and well-protected transceiver package has been labeled and marked to default FOCC standards. Customized label or package solutions are available on request.
● OEM & Customs:
Partnering with a variety of world class OEM manufacturers for over 8 years, FOCC is able to provide customized high-quality and cost-effective solutions for all needs and specifications, including optical design, mechanical design, Printed Circuit Board (PCB) layout and electrical design, software & firmware design, integrated assembly, specific labels, etc. With surging sales and favorable customer feedback, FOCC has been expanding rapidly across the world and is becoming the leading provider of the optical communication industry.
● Shipment:
FOCC can ship via FedEx, DHL, UPS, TNT, EMS or a customer-arranged carrier. Items are often shipped the same day (some transceivers can be out the door in 20 minutes). If we have no stock in any of our global warehouses, the shipment will be delayed for 1-2 days. DHL will take 2-4 business days for delivery and FedEx only needs 1-3 business days. For Spain, Italy, Brazil and certain other countries, items will take longer to arrive due to the customs clearance period.